公司名称:东莞市具力自动化设备科技有限公司
座机:0769-85877871
传真:0769-85877871-810
邮箱:3004493900@qq.com
联系人:刘先生
电话:13926856508
地址:广东省东莞市厚街镇彩云东路3号2号楼101室
JL-M004 汽车离合片自动铆合机
主要用途: 用于汽车离合器片的铆接。
工作范围: 铆接距离范围:130-300mm
铆接外径范围:160-330mm
主要优点:
1:具有铆钉分选排列自动送料功能,也可以单边下料,实现单点铆接
2、产品换型时,需要整体更换分度工装,上冲头模组,铆钉送料器,换型时间小于20分钟。
3、设备有计数,过载保护功能。
4、采用压力传感器控制气液增压缸铆接力的消息,铆接力可以根据产品要求进行调节。
5、预压力大小通过调节工装上弹簧的压缩量来实现。
6、采用伺服电机控制工装的旋转角度,精度等级 +/-1
7、设备采用PLC可编程逻辑控制器进行控制,设定程序可以保存,程序中需要包含可以实现单点铆接的程序。
8、具有铆钉缺料停机功能,当铆钉缺料时停机保护,手工补料后自动运行。
主要参数:
型号 | Model | JL-M004 |
额定电压 | Rated voltage | 220V |
额定功率 | Rated power | 4.5KW |
外形尺寸 | Dimensions | 1800x1500x1500mm |
铆接外径范围 | Outside diameter range of riveting | 160-330mm |
铆接距离范围 | Range of riveting | 130-330mm |
铆接行程 | Riveting stroke | 60mm |
气源压力 | Air pressure | 0.5-0.6MPa |
JL—M004 Auto riveting machine for automobile clutch
MAIN PURPOS:It is used for riveting of automobile clutch.
WORKING AREA: Riveting range:130-300mm
Riveting outer diameter range:160-330mm
PRODUCT FATURE:
1、With rivet sorting and arranging automatic feeding function ,and single side blanking to realize single point riveting.
2、Product replacement ,need to replace the whole indexing fixture ,upper punch module rivet feeder ,the changeover time less than 20 minutes.
3、The equipment has the function of counting and overloading protection,.
4、The pressure sensor is used to cantrol the size of riveing force of the gasliquid pressurized cylinder ,and the riveting force can be adjusted according to the requirements of the product.
5、 The size of pre pressure is realized by adjusting the compression of the spring in the tooling.
6、Using the servo motor to control the rotatinon angle of the tooling, the precision grade is +/-1.
7、The equipment is controlled by PLC programmable logic controlledr ,and the set program can be saved , The program needs to include a single point riveting program,
8、It has the funcion of cutting the rivet,When the rivet is missing ,the machine is shutdown and the manual feed is automatically operated.
Main parameter:
型号 | Model | JL-M004 |
额定电压 | Rated voltage | 220V |
额定功率 | Rated power | 4.5KW |
外形尺寸 | Dimensions | 1800x1500x1500mm |
铆接外径范围 | Outside diameter range of riveting | 160-330mm |
铆接距离范围 | Range of riveting | 130-330mm |
铆接行程 | Riveting stroke | 60mm |
气源压力 | Air pressure | 0.5-0.6MPa |
刘先生 | |
13926856508 | |
0769-85877871-810 | |
juliautomation@julizdh.com | |
广东省东莞市厚街镇彩云东路3号2号楼101室 |